look bindings

OUR TIPS TO CHOOSING YOUR SKI BINDINGS


You bought new skis and you now want to equip bindings well suited to your practice? You're struggling to differentiate all models?
What are the indicators and settings on the bindings?


Here are some tips and answers to help you make your decision and select the model that suits you best.
However, keep in mind that your bindings are designed to limit the risk of injury from falls, while providing the necessary support to ski with maximum pleasure.
The precise adjustment of your bindings must be done by a professional. When buying your skis, your dealer should normally measure, using a machine control releasing torques obtained with your bindings with your own shoes (ISO 11088 standard).


1. CHOOSE THE MODEL ADAPTED TO YOUR SKIS AND YOUR PRACTICE


Most skis are now offered with an associated pair of bindings, the PACKS.

In addition to design, colour and mounting compatibility, the characteristics of the bindings offered in the pack are adapted to those of the skis and the practice for which they are intended. Therefore, trust the manufacturer and your retailer when recommending a complete package.

If you select your bindings yourself, make sure that the adjustment range of your bindings allows for a sufficient latitude of adjustement and check the width of the brakes to ensure that they are best suited to the width of the skis.




"SYSTEMS" BINDINGS


Piste skis and some All Mountain skis are equipped with interfaces compatible with only one type of binding, this is called a "SYSTEM".

RossignoL bindings system


Their interfaces (plates) have been developed to improve the behaviour of skis in curves. By slightly raising the position of the boot, the ride is more incisive and more powerful.

The KONECT system is used on high-end, high-performance skis. The XPRESS system focuses on lightness and comfort for leisure skiing. Children's skis are equipped with the KID system which is automatically compatible with children's "C" ski boots and adult "A" ski boots.


OPEN OR TO BE SCREWED BINDINGS


Freeride and touring skis and some All Mountain skis do not have an integrated ski system. Therefore, your dealer will have to install "OPEN" or "TO BE SCREWED" bindings on the skis after having drilled them beforehand.

RossignoL bindings system


The length adjustment range of "open" bindings is often reduced in order to favour transmission, ski-snow contact and lightness: in this case it is necessary to be as close as possible to the snow and without interface.


Here, in a few lines, are the main families of LOOK bindings :

The PIVOT binding is a mythical product, the reference in the world of Freeskiing for those who are looking for a product without concessions. The best riders have absolute confidence in this binding: #itrustlook. The SPX technology was developed for the World Cup in collaboration with the athletes. The SPX bindings therefore ensure a high level of precision, performance and safety, both on piste and freeride. Available in a screw-on version for flat skis or on Konect systems fitted to certain skis. NX bindings are ideal for all skiers who are looking for a secure, lightweight and easy to use binding. Available as a screw-on version for flat skis or on Konect systems for certain skis. TEAM models are designed specifically for children, with a constant focus on safety and lightness. They are automatically compatible with children's (type C) and adult (type A) boots. The HM, ST or SUPERLITE touring bindings with PIN TECH technology allow mountain skiers to practice touring or ski mountaineering.


look bindings

look bindings
look bindings

2. CHOOSE THE MODEL ADAPTED TO YOUR SKIS BOOTS


There are several standards for ski boot soles:
- The flat soles that you have all known for more than 30 years, conform to the ISO 5355 standard, adult "A" or child "C" type.
- The new GRIPWALK walking soles that make life easier for skiers when they walk... and conform to the future ISO 23223 standard, adult "A" or child "C".
- The soles of ski touring boots, generally conform to the ISO 9523 standard.

All LOOK bindings (except the "RACE" racing range) are now compatible with the first 2 standards:
- ISO 5355, "A" and "C".
- GRIPWALK (future ISO 23223), 'A' and 'C'.

RACE" bindings are only compatible with ISO 5355 "A" flat soles.

The use of ISO 9523 touring boots (with metal inserts) is only possible with LOOK bindings dedicated to touring with PIN TECH technology.


3. DETERMINE THE RELEASE VALUE AND HAVE YOUR BINDINGS ADJUSTED


Weight, height, age, level of practice and boot length are used to determine on which figure to place the indicator at the front and back of the binding, in accordance with ISO 11088.


look bindings

Use this "ISO Setting" et accédez à l'application ISOSKI pour déterminer la valeur de déclenchement adaptée à vos critères et qui vous permettra de skier avec un maximum de sécurité. link and access the ISOSKI application to determine the release value that suits your criteria and that will allow you to ski with maximum safety.


Always ask a professional to precisely adjust your bindings to your boots and adjust them to your profile.


Visit the « Technologies » page to learn even more and understand in detail the features that make LOOK bindings your best allies for unforgettable days of skiing.